WhiteF4lkon
Published
It is playable, but there are some lags with graphics and sound and there are periodic freezes.
Ripples on the walls and characters' hair. Sometimes the loading of textures on some objects is noticeable.
Can't switch modes in video settings. Only full screen mode works.
Some freezes when moving from room to room in first time running the game.
There is a problem with switching modes using the Space key in the settings - for some reason, the modes are switched instead of confirming the choice.
Proton 8.0-2 causes the game to freeze at the very beginning of the first cutscene.
--skip-launcher --vulkan
The game does not sync data with Steam Cloud. Steam support offer to solve the problem on my side, but everything is fine with my Internet, and other games are synchronizing.
With Proton 8.0-3, 7.0-6 and Proton Experimental the game doesn't start at all.
By the way, Steam Cloud synchronized the data after the first launch and exit of the game... and now it displays a synchronization error message.
Playable, but have a some freezes. In multiplayer PunkBuster doesn't kicks from server.
Only Launcher works with some older versions of Proton
Launcher runs with Proton 3.16-9 and Proton 4.2-9, the game itself does not start at all. With Proton 4.11-12 and Proton 5.0-3, even the launcher does not start.
Comanche Open Multiplayer Beta: The game doesn't start at all
With Proton 5.0-3, Proton 4.11-12 and Proton 3-16-9 only black screen is displayed without sounds.
The following launch options were used with Proton 5.0-3: PROTON_USE_WINED3D11=1 %command% PROTON_USE_WINED3D=1 %command% PROTON_NO_D3D11=1 %command% PROTON_NO_ESYNC=1 %command%
Technical Beta Testing of the Game (28.01.2020): Black screen only without any sounds.
Used following launch option:
- PROTON_NO_ESYNC=1 %command%
- PROTON_USE_WINED3D11=1 %command%
- PROTON_NO_ESYNC=1 PROTON_USE_WINED3D11=1 %command%
- PROTON_NO_D3D11=1 %command%
Result is the same.
If only a black screen is visible during loading the game, press Enter three times.
Some minor freezes
Only training has been completed, multiplayer cannot be verified due to an unsuccessful search for players for more than 3 minutes.
PROTON_USE_WINED3D=1 %command%
When starting the game without launch options, there were constant jerks during playing game. But the launch option "PROTON_USE_WINED3D=1 %command%" solved the problem completely.
Everything works fine. Update of Rocstar Social Club can outputs an error but game is running perfectly.
Some freezes that pass with time
- The opening sceene can plays multiple times. If you press Esc, the image may disappear, but the sound will remain.
- After some time, the game will start, but the loading process may be lengthy.
After playing the starting video, the game crashes with flollowing error message: "An unknown exception has occurred". Windows users saing what the same problem, when they installing the game to drive differing from drive "C:" o_O
Trying to use launch option: "PROTON_NO_ESYNC=1 PROTON_NO_D3D11=1 PROTON_USE_WINED3D11=1 %command%" - no effect.
If after playing the starting video, the game crashes with flollowing error message: "An unknown exception has occurred", you must to move the game files to main Steam folder...
Works great out of the box on high graphics settings
The report concerns the demo version of the game on Steam.
Only the startup logo and window [mk10] with black screen issue is launched. "Configure" menu option dosn't start at all. Platinum users, did you use protontricks or some other twiks?
- Lags with keyboard control: The "Left" key sticks issue in the Settings, which causes all parameters to switch to the leftmost position, without being able to change them.
- There is no problem with DualShock 3 gamepad.
- Lags on my hardware with any setting, even lower settings and autosettings option.
After using “protontricks 444090 dotnet40” and installing .NET 4.0, the game is loaded from Steam, but freezes on the “Database loading” process.
If you don't have connection to server, use VPN (https://windscribe.com/guides/linux#how-to with free 10Gb traffic). I was connected using windscribe and played one match without any kicks by anti-cheat and etc.
- Stuck on start logo. 2. The process "PnzWebWrapper.exe" is not killed by any command, session restart only helps.
- Install protontricks from https://github.com/Matoking/protontricks#pipx-recommended
- Use "protontricks 813820 dotnet40" command to install .NET 4.0;
- Run SMITE from Steam;
- If game dosn't start, then replace the EAC dlls in Realm Royal with the ones from Paladins. The dlls for Realm Royal that need replaced are located in /Realm Royale/Binaries/EasyAntiCheat and /Realm Royale/Binaries/Win64/EasyAntiCheat The dlls that you use from Palidans are called (EasyAntiCheat_x64.dll & EasyAntiCheat_x86.dll) located in Paladins/Bianaries/EasyAntiCheat
- If you getting kicked from server, then you can try VPN (for example from "https://windscribe.com/guides/linux#how-to" with free 10Gb traffic)
Sorry, I don't checked real online match. Game runs according to the instructions below, but crashes to the main menu after joining the match.
Black screen with subtitles when playing non-ingame video between missions. All other is fine.
Getting kicked from server by EAC (after a minute of playing game) with the message: "Authentication timed out (1/2)".
As stated below: "Works if you replace the EAC dlls in Smite with the the ones from paladins The dlls for smite that need replaced are located in Smite/Binaries/EasyAntiCheat Smite/Binaries/Win32/EasyAntiCheat Smite/Binaries/Win64/EasyAntiCheat And the dlls that you use from palidans are called (EasyAntiCheat_x64.dll & EasyAntiCheatx86.dll) located in Paladins/Bianaries/EasyAntiCheat You also need to install dotnet40 & vcrun2010 from protontricks"
- Install protontricks from https://github.com/Matoking/protontricks#pipx-recommended
- Use "protontricks 386360 dotnet40" command to install .NET 4.0
- Use "protontricks 386360 vcrun2010" command to install VC Redist 2010
- Run SMITE from Steam
If you don't have connection to server, use VPN ("https://windscribe.com/guides/linux#how-to" with free 10Gb traffic).
Sorry, I don't checked real online match. Game runs according to the instructions below, but crashes to the main menu after joining the match.
Offline mod works fine. Game doesn't enters in EA-account. Not all processes unloads from memory after quit game: you need to kill it manualy.
With Proton versions 7.0-6, 8.0-3 and Experimental, the game crashes immediately after connecting to the server.
Crackling while loading levels. During the game, everything seems to be fine.
Shimmering textures on some surfaces: tree trunks, foliage of trees and bushes, some flowers.
Some few freezes in catscenes.
Same graphical issues as single player
- Tried to run Squad on Free Weekend event. Game doesn't starts at all. Steam shows the following message: "An error occurred while updaing Squad (missing exectutable): $HOME/Games/SteamLibrary/steamapps/common/Squad/squad_launcher.exe", but "Verify Integrity..." option shows what all files successfully validated.
- In "Squad" folder exists only "SquadGame" folder without any other files and folders.
- Running game. If you have a Black Screen Issue, press [Space] buttone. After loading offline mission do the same, if problem repits.
- Ingame problems: Lags, Freezes, Graphics issues (see screenshot: https://clck.ru/HJpSE) and bad Russian Localization.
With Proton 8.0-3, 7.0-6, Proton Hotfix, Proton Experimental and custom NorthstarProton-8.1-1 the game doesn't launch at all because EA Launcher problems.
PROTON_USE_WINED3D=1 %command%
Without the specified startup parameter, the game crashes with an error related to the file winevulkan.dll. Everything is fine with the startup parameter.
Some minor lags that pass with time
With Proton newer versions (7.0-6 or 8.0-2), the game freezes on the authorization process at the beginning of the loading
