PlayableShow Details
Unknown
Não funcionou no Proton GE, mas rodou perfeito no Proton Experimental.
Runs fine
No issues
Surprisingly worked OOTB
Actually had more problems on Windows with this game, but on Linux this ran perfectly without requiring any sort of modifications.
Clicking “PLAY” the status changes to “update executable” for a while and stops launching
gamemoderun %command%
There's a possible fix in the discussions for this problem, but apparently it only works on Windows. Tried the launching command suggestions from here with no success.
Não funcionou comigo na heroic
So instalei o jogo sem modificação nehuma, a heroic está definida pra usar o proton experimental por padrão, tentei mudar mas não sei usar wine ou proton como configurar, alterar prefixos e tal, então infelizmente para mim não deu.
Three months ago, nothing I did would convince the game to run. Now, suddenly, it works just fine, minus some issues tabbing away from the window. As far as I'm aware, I haven't changed anything relevant, but a win's a win!
DO NOT USE OPEN SOURCE AMD GPU DRIVERS
Once I switched nothing else was required to start it.
If you get the BugSplat error verify files or reinstall the game.
WINE_CPU_TOPOLOGY=2:0,1 MANGOHUD=1 MANGOHUD_CONFIG=fps_limit=60,af=16,vsync=3 %command%
The game will crash no matter what at the start of chapter 9 after the cutscene. It's also a problem on Windows that's never been fixed. Set the CPU affinity to 2 cores and lock the game to 60fps to prevent it.
The game only launches with Proton Hotfix
Funciona sem nenhuma configuração adicional
Multiplayer online funciona normalmente
Simplemente funciona, apesar de diversos comentaríos dizendo que precisava colocar comandos no launcher para o jogo inciar. Aparentemente a valve corrigiu o proproblema na ultima versão do proton experimental.
PROTON_USE_WINED3D=1 %command%
Didn't test online play. Freezes on start without launch option.
PROTON_USE_WINED3D=1 %command%
Without the PROTON_USE_WINED3D=1 %command% options in the launcher, the game flashes every 10 seconds.
After switching to experimental and setting launch options it worked just as well as it would on windows and i experienced no errors
PROTON_USE_WINED3D=1 %command%
Before I attempted to play without the launch options and it froze immediately
Freezes at disclaimer screen on startup
Broken
PROTON_USE_WINED3D11=1 %command%
Very minor artifacts or odd rendering, mostly when alt-tabbing in and out.
After alt-tabbing out and back in, mouse would sometimes not be constrained to the game screen. This was fixed by tabbing out and back in again
Once I got it running, everything worked great. The other tinker options of forcing D3D9 didn't work for me, so try a a few different thngs.
Fonctionnait très bien il y a 3 mois.
aujourd'hui, rien à faire, bloqué à l'écran SEGA. Tentative d'options de lancement infructueuses.
gamemoderun PROTON_NO_D3D11=1 PROTON_NO_D3D10=1 %command%
The game will function as expected as long as you do not remove focus from the window. Changing workspaces will cause the game to freeze or crash.
No heavy tinkering required. Simply insert known fix into launch options and use the correct proton version. I used GE, but experimental or 9 will work.
PROTON_USE_WINED3D11=1 %command%
1080p和2K分辨率下帧率很低，要调到1280x720才流畅。
如果用默认配置，能进游戏，分辨率可以调到2K，但是会经常卡死。
把运行参数设置为PROTON_USE_WINED3D11=1 %command%可以稳定运行，但需要把分辨率调低画面才比较流畅。
PROTON_NO_D3D11=1 PROTON_NO_D3D10=1 %command%
Bottom line is the game, with minor tinkering runs extremely well and was very enjoyable. I had to use the launch options listed above otherwise the game would get stuck upon launching. Using the launch options allows the game to get to the main menu and play as normal. Addtionally, using the "base" proton version works just fine, however I did notice screen tearing with this, changing to experimental took care of this issue for me, or it was minimal enough that I didn't notice.
PROTON_USE_WINED3D=1 %command%
cutscenes are not full screen. Have black bars all around
Tried all other suggestions before and only setting PROTON_USE_WINED3D fixed all my issues. Don't have to set CPU topology for high core count. Tried with both experimental and proton9, I'm making an assumption that newer versions of proton will work with just this setting.
不太愉快
会卡死，有时候返回桌面再进窗口就可以继续，有时候完全卡死只能关掉游戏重进。
PROTON_USE_WINED3D11=1
Very minor crackling.
Screen sharing using discord crashes the game after about 10 seconds.
No amount of tinkering got the game to run.
gamemoderun PROTON_NO_D3D11=1 PROTON_NO_D3D10=1 %command%
I tried quite a few tricks and tweaks, all to no avail.
I tried multiple versions of Proton -- both official and unofficial -- along with all the recommended launch options found in the other reviews, and the game would crash on startup every time no matter what.
Works perfectly with zero tweaking, no issues.
Co-op Exterminatus mode worked fine with a friend, no issues.
gamemoderun PROTON_NO_D3D11=1 PROTON_NO_D3D10=1 %command%
The game would not launch without the current launch options. It would get stuck at the ESRB screen and would not proceed. With the launch options, it launched and played fine on both protonGE and proton experimental
and it launched fine with p9.11 too
gamemoderun PROTON_NO_D3D11=1 PROTON_NO_D3D10=1 %command%
Finally get it to work. You need to force PROTON EXPERIMENTAL an force Proton to use d3d9 so deactivate d3d10 & d3d11 ... after that the game worked. With proton 9.0.2 & GE9-11I get NO videos & green menu problems
Not able to get into game tried everything
Game starts: yes Audio: yes Video: no Intro: no - only audio Game Menu: no everything is black One time: I ad half menu, half green bar
Tried that gamemoderun D3D11=1 ... but did not help. also tried Proton 9.02 - nothing :(
No tinkering required. Did not test multiplayer.
Green menu, all attempts to fix failed.
The menu is green, and no audio. Tried to switch to proton 9.0-2, and tried the option: gamemoderun %command%, and also gamemoderun PROTON_USE_WINED3D11=1 %command%, but the problem persists.
The controller would function until I entered the main menu screen. To fix this, I was required to perform the following:
- Load the game up via PC.
- Plug in a controller.
- Go to gameplay settings and enable Controller Support.
- Exit the game and await cloud sycning (took approximately 30 seconds).
- Load the game up via Steam Deck.
PROTON_USE_WINED3D11=1
With Proton-Experimental (default steam option) the audio is totally distorded
I didn't play multiplayer, so can't comment on that. But solo was fine. No issues at all.
Works flawlessly out of the box
Smooth gameplay
Installed and runs without problems.
