UnknownUnknown
Download size 0B. Install broken
Installation of files broken
gamemoderun WINE_DO_NOT_CREATE_DXGI_DEVICE_MANAGER=1 %command%
Set graphics quality to lowest preset
GE-Proton7-20 allows controller input to be recognized. After that, Steam Deck controller config must be set to a gamepad rather than the official layout. Using the launch option is optional, it fixes the opening animation, as noted by Yip.
je n'ai fait aucune modification. lancer a partir de Steam, proton experimental, et radiomaster pocket en USB C.
Game runs great!! I didn't play anyone else, but I received some challenges so far. Online seems to be working fine. I was able to connect a RadioMaster Zorro and configure using the in game controller configuration. Happy Flying!!!
Game gets stuck on initialization.
Find prefix, go to:
C:\Users*you*\AppData\LocalLow\Drone Racing League\DRL Simulator\Player.log
Look for Epic Online Sevices(EOS) failure message.
Copy and paste auth URL link in browser.
Once auth is completed game should finish initializing.
Opening moving doesn't appear to work correctly. Opened in Gaming mode after adding non steam game. GE-Proton7-20 has to be selected
EGS via Heroic
gamemoderun WINE_DO_NOT_CREATE_DXGI_DEVICE_MANAGER=1 %command%
Flawless Multiplayer
You can fix the pink glitched videos with: WINE_DO_NOT_CREATE_DXGI_DEVICE_MANAGER=1
The game freezes after a few minutes and some Unity loading window appears. Not playable.
Works great OOTB
I cannot speak to the use of real drone control radios etc., I've only played with a gamepad - but for me, it's flawless with no tweaks.
FS-i6s transmitter was plugged in an turned on. Gave back an error message in the lower part of screen in main menu, where usually the controller is found. I was able to fix that error by clicking on the error and manually calibrating the controlls. Works perfect now.
Had to install a custom fork of proton + some other tweaks. Typical gamer would lose interest.
Proton -7.1-GE-2 GloriousEggroll
I used https://github.com/GloriousEggroll/proton-ge-custom and that worked. Did not work with any other version of proton. Tried mf-install (https://github.com/z0z0z/mf-install), first but that didn't work. I had been able to get the game running on Proton 6.3-7 a few months ago, but it didnt seem to work on 6.3-8 now.
Taranis QX7 was not detected. Had to map controls using steam's controller settings, then it worked. Also had to disable steam input for some reason in DRL sim -> properties -> controller for it to work.
Remap your RC controller to match the gamepad profiles with channels 1,2,4,5 and avoid channel 3 then you will be fine. Disable steam input.
Game starts on wrong monitor (non-primary monitor).
OpenTX/EdgeTX radios can be used but are mapped as gamepads, so the game assumes that axis are ordered LX,LY,LZ,RX,RY,RZ - where the "Z" axis is a trigger. As RC radios generally map axis LX,LY,RX,RY this means that channel 3 "vanishes" as the game does not look for trigger inputs. If we map axis to channels 1,2,4,5 then the game works fine. Disable steam input for this game too.
If you have esync enabled, increase the open file limit for your machine. Game won't work at all otherwise.
Worked with the E-sky 0905A RC simulator controller.
Works just fine now
I wasn't able to run this game for quite a while because game couldn't recognize my controller properly. Somehow today I've manged to configure it and play. I had to change channel in opentx for throttle.
Controller was not detected at first, but after setting the steam input to disabled on DRL (right click on properties and go to controller tab), I was able to set up my Taranis QX7 and it works perfect! Just use steam input to set axes!
No major issues that I have found. Just make sure to set up controller with steam input, and then for some reason disable it for DRL. Dont know why, but that did the trick for me!
Transmitter / Joystick mapping is rubbish
Requires mf-install (https://github.com/z0z0z/mf-install). Once this is installed it runs. However, it seems the mapping between the connected joysticks or RC transmitters (DeviationTx) is not working properly. Not possible to fix by calibration.
BetaFPV LiteRadio 2 was detected as a Taranis, Channels were not mapped correctly leading it to be unplayable.
Crashes on quiting
RC controller not working
Requires mf-install (https://github.com/z0z0z/mf-install). Once this is installed it runs but....
My Taranis X9D+ is detected but no channels are found in the calibration. Cannot play the game as no controls.
Controller not properly mapped, requires media-foundation libraries
mf-install (https://github.com/z0z0z/mf-install) required to start the game. Once in the game I attempted to connect my RC controller, which I have used in LiftOff and other sims. The controller was not properly detect and only 3 out of the 4 available axis were mapped, with the game consistently refusing to detect the rudder input. The game is therefore unplayable. Tested with DeviationTX on Jumper T8SGv2 which shows up on jstest-gtk with all axis working correctly. For the "leading" quadcopter SIM this needs some work on controller mapping. Tried to use a Nintendo switch but it wouldn't even detect the axis on that. Not great.
RC controller not working
After tinkering with Steam controller settings, though it lists my RC controller (Flysky FS-i6X via a simulator dongle) and succeeds to map my axes in controller config, DRL Sim does not see any axis movement in its own controller calibration.
Had to use https://github.com/z0z0z/mf-install to get the game to start up at all.
Requires mf-install (https://github.com/z0z0z/mf-install) after that runs like a charm.
UnknownBlack screen then nothing.
UnknownUnknownBlack screen after launching.
Unknown
Starts black screen, but does not load after. Tried PROTON_USE_WINED3D, PROTON_NO_D3D11, PROTON_NO_ESYNC. Game does not work. Tested July 3, 2019 on Proton 4.2-9.
Doesn't start... Just black screen
