

Works just fine OOTB
Works OOTB

Works perfectly OOTB on the deck

There's a large crackle at times, but doesn't really disturb gameplay
I've had one crash the whole time I've played it, other than that I've had no real issues

Fullscreen / window mode change sometimes don't work.
Overall works great.
First time launched an issue appeared, proably related to my iGPU / GPU selection. After some forcing discrete gpu and proton experiemental, no problem.
Here is a video of the testing: https://youtu.be/g9N3uXpfnRY
Controller order is finnicky, and a disconnect crashed controller support for the whole OS.

PULSE_LATENCY_MSEC=50 gamemoderun %command% -dx12
- Had to add
PULSE_LATENCY_MSEC=50

gamemoderun %command%
Ts Game Runs Out Of The Box as expected from a lego game
Works perfectly out of the box

Running under Proton 9.0-4 works perfectly with controller, fullscreen @ 3440x1440 has no issues either.
systemd-inhibit game-performance %command%
works well


I played it most of the time on my pc where I installed windows, and I enjoyed it there very much
I just tested it on this old notebook and got around 2 FPS, but technically it ran well given the bad hardware.
I don't own the game on steam, only on epic games and therefore I needed the heroic games launcher. Don't use the wine-proton version! it wont work... You have to use the normal proton version! Because of that I think it has to start on steam

The Epic version of the game needs to be launched in desktop mode one time before working in game mode
The Epic version of the game, installed via Heroic Launcher, needs to be changed manually to the latest proton version as wine won't boot the game. Then, the game needs to be launched through desktop mode in order to trigger an Epic internet shortcut that asks for account permissions, and which is required to play. Once all of the above is done, the game can be launched through game mode and runs great with a 40fps cap, all settings on high. TAA pairs a bit poorly with the 720p default resolution, so I advise turning it off or enabling FXAA instead.

-dx12
30 fps lock, low settings, reduced TDP
This was a EPIC Install via JunkStore. By default it ran badly - good fps but then dropping down to 8fps and then back up.

Epic store version.. Had to run game once in desktop mode. Opens a epic store webpage where you have to agree to your epic account being used. Once done, game will open in game mode.
Epic store version - Had to run game in desktop mode once first to accept using epic account. Then worked in game mode.

Beautiful out of the box experience!
Just force proton compatibility from steam and she just runs. No performance slow downs.
Works OOTB

Runs perfectly

Worked great, no issues!
This game worked great! Interfaced with my wireless Xbox controller without issues. As with my previous games I like to play with a controller, I'm going to list the steps I took to get my wireless controller working with the Xbox dongle.
Unplug your Xbox devices.
Clone the repository using the following command in your terminal: "git clone https://github.com/medusalix/xone"
Install xone: "cd xone sudo ./install.sh"
Download the firmware for the wireless dongle: "sudo xone-get-firmware.sh"
Plug in your Xbox devices and follow the pairing instructions per Microsoft's documentation: https://support.xbox.com/en-US/help/hardware-network/controller/connect-xbox-wireless-controller-to-pc
Works out of the box.

Worked out of the box
Worked out of the box, and was able to play local splitscreen. No issues so far.

I had some crackling issues after pausing and going to sleep mode and resuming after
During a attack of the clones in the droid factory, frame rate fell way down for a noticeable difference

I've complete this game using Proton 9.0-1 without issues.
I've just noticed bad performance on the "Droid facttory" level on Episode II (but I've seen Windows player complaining about it as well, so I assume it's not a Proton problem)
The game's audio makes loud popping noises randomly during playthrough. No known fix, just a crappy audio engine.

had to change the location of the shader cache and delete all of them in order for it to finally work
the audio was sometimes crackling BUT it is likely because of my new headphones, so i would ignore that but i'm putting it here since i should anyway!!!

raramente o audio da umas estraladas
O jogo só abriu com um proton mais antigo, rodou perfeitamente, as vezes o áudio da uns estralos mas nada que atrapalhe a gameplay. salvamentos funcionando, as vezes da quedas de frame mas é normal ja que no windows acontecia a mesma coisa.

game will not start without processing the shaders but they will either be stuck at 0% or 100%
had to screw around with the gamepad settings and had to restart steam by killing it through the System Monitor since the shaders processing was at 0%
can't even skip the processing! really not sure why it doesn't work but that's it for now

graphics look weird, quite alot of noise, could be misconfigured on my end though. not an issue anyway
sometimes in small rooms, the framerate can be around 30-45FPS, doesn't happen in the overworld
The game normally launches and runs perfectly as intended. However, from time to time it launches into a broken display. To fix this, remove the PCCONFIG.TXT file from the prefix's Application Data folder. It will recreate itself on the next run and launches as intended.

Near perfect OOTB
Tabbing out sometimes causes FPS to drop to around 20-30 until the game is restarted

Runs perfectly on highest settings for me.

Stuck at "Running"
I can't get past the "running" in steam it processes vulkan shaders and then sticks at "running" I've never made it to the main menu. I'm open to suggestions