Unknown
SteamDeck=0 WINEDLLOVERRIDES="version=n,b" %command%
Without nopssdk, the game does not launch and throws an error.
With nopssdk (v1.0.3), it throws two errors every time you start the game, but the game launches and works fine afterwards.
SteamDeck=1 DXVK_HDR=1 gamescope -b -f -H 2160 -r 120 --hdr-enabled --adaptive-sync --backend sdl -- %command%
Unable to launch without SteamDeck=1
SteamDeck=1 %command%
setting steamdeck as launch option is enough to make it run perfectly
Steamdeck=1 %command%
SteamDeck=1 gamescope -W 3840 -H 2160 -f --hdr-enabled -- %command%
DS4 controller did not work anymore after an update of the game. Using Steam Input worked.
SteamDeck=1 %command%
After playing a couple of minutes the game will freeze so badly, around 0fps-2fps and stay like that
After playing a couple of minutes the game will freeze so badly, around 0fps-2fps and stay like that
I have tried different proton versions and still have the same problem, I notice the user's proton on the posts here and tried but the same result.
gamemoderun "SteamDeck=1"
occassionally the PS4 Controller messes up input, reconnecting helps fix it
SteamDeck=1 %command%
Does not work without SteamDeck=1 launch options.
SteamDeck=1 %command%
Without the "SteamDeck=1 %command%" Launch Option for desktop the game immediately throws errors about missing libraries. With the Launch Option set, the game launches and plays perfectly, max settings, 2560x1440@170Hz
SteamDeck=1 %command%
occasional graphics triangles glitching; blue haze at bottom of screen when light glare present(in game)
occasional frame lag
Will not launch without the launch option "SteamDeck=1 %command%"
SteamDeck=1 %command%
Besides having to put in "SteamDeck=1 %command%" was able to run the begging seqence of the game just fine after creating a psn account.
mangohud=1 SteamDeck=1 gamemoderun %command%
RADV_PERFTEST=gpl,nggc,sam
SteamDeck=1 %command%
If you're playing on Linux (but not the SteamDeck) you still have to use the launch command to make it start. Take care: after the first launch with this command the game defaults its settings to the performance level of the Steam Deck, so settings are pretty low even if your gaming pc has enough power for higher settings. So just go to the options and configure the graphics according to your hardware. You only have to do this once; I used the highest settings and had zero issues.
SteamDeck=1 %command%
I'm running this game on Linux Mint with an "old" GTX 970. At the beginning I had crackling noise in the background, but this was only during the initial launch when the game was "building shaders", after that the sound issue went away. I'm using the GE9-20 with the launch command mentionned above.
The most painful part for me wasn't to get the game working, but to link my Steam account to my PSN account. I was stuck on the screen "Waiting for connection to server" or something like that.
I followed James' advice (see here https://www.protondb.com/app/2322010#hPigt4AZ1c) and it worked fine. All the instructions are in the Reddit post linked by James, but it is a bit technical I have to admit.
I used ChatGPT to decode the Sony URL and extract the client_id and linkToken values, and then it worked like a charm.
Here's a summary of the procedure, but go see the Reddit post for more info :
- Make sure you already have a PSN account, and log in to it in your default browser
- Launch GoW and wait for the "Waiting for server authentication" At that time your default browser should have opened (maybe in the background) with a standard Sony PSN page. Do not close GoW, and switch (alt+tab) to your browser.
- Copy the URL of this page in a text file, then click on the blue Continue button, it'll generate an error in the next page, do not close that tab.
- In a new tab, open ChatGPT, paste the URL from the text file and ask it to extract the decoded client_id and linkToken values
- Go back to the Sony page with the error "Parameter 'client_id' is malformed" error, and copy that URL
- Paste that 2nd URL into your text file. You'll see in that URL the values client_id and redirect_uri are "=null", which is giving the issue.
- Replace your client_id (YOUR-CLIENT-ID-HERE) and linkToken (YOUR-LINKTOKEN-HERE) values given by ChatGPT in the URL below
- Copy that reconstructed URL from your text file andpaste it in the address bar of the window with the error message and hit Enter. This should validate the request and link your Steam account with your PSN. Switch back to GoW.
Some text is difficult to read
The game freezes sometimes due to the loading of game locations to obtain smooth transisions. Fps drops from 50 to 30.
The game refuses to launch in offline mode, for that you need psn. To fix this bug, you need at first to diwnload the game to a pc and then enter your psn account in the game. Then, you need to copy the entire "Sony Interactive Entertainment Inc" from your pc (normaly located in C:\Users"your username"\AppData\Local). Once you copy this folder on a usb, go to desktop mode and paste the folder in this exact direction: /home/deck/.local/share/Steam/steamapps/compatdata/2322010 .
SteamDeck=1 %command%
Saccades au bout de quelques disaines de minutes de jeu
Après avoir passé plusieurs heures pour lié mon compte PSN et Linux (encore merci Sony pour ça...) j'ai enfin pu lancer le jeu sans problème. Le jour tourne nikel en ultra de mon coté pendant plusieurs disaines de minutes (entre 30 et 50minutes) avec que d'importants problemes de saccades n'arrivent et rendre le jeu gerbotron.
From a Windows PC, copy your entire "Sony Interactive Entertainment" folder to the local appdata in compatdata/2322010 after signing into your Playstation account in order to play the game offline on the Steam Deck.
Certain locations cause the game to lag, for best balance of battery life and power I used:
GameScope:
Refresh Rate/Frame Limit 60 FPS / 60Hz TDP Limit: 12 watts
Game Settings:
Vsync: Off Aspect Ratio: Auto Frame Rate Limit: 30 fps Frame Gen: Off
Scaling Method: AMD FSR 3.1 (you can use Intel XeSS but it makes the water shimmer) Quality: Quality
Graphics:
Textures: Medium Models: Medium Everything else Low
Personal Preference:
Motion Blur: Off
Audio cuts in and out randomly
Intel XeSS makes the water shimmer in my experience.
SteamDeck=1 %command%
So, at first the game didn't load because of some PSN dkms BS... After I entered the command SteamDeck=1 %command% into Launch Options, the game did start in a black screen though, with a message like "Waiting for service confirmation" or something like that... I've tried installing KDE and GNOME but no success. As idiotic as it may sound, all I did was log in to PSN in firefox, i don't know how and why, but it made the game launch as expected.
I'm using Arch with Hyprland!
SteamDeck=1 gamemoderun gamescope -ef -h 2160 -w 3840 -r 120 --hdr-enabled --adaptive-sync %command%
"SteamDeck=1 %command%" is a HARD requirement. gamescope is mainly a quality of life tinker but recommended if you want HDR to work. There's also a nexus mod that may bypass the PSN account requirement.
Works fine with good performance 90-120 FPS with ocasional drops to 60, DLSS and FSR FG works, no problems with XBOX controller.
On fast travel FPS drops to 60
Santa Monica have released two or three patches since my previous report. I can confirm all now works as expected, right out of the box. No notes, A* playing experience!
gamemoderun mangohud gamescope -ef -w 1920 -h 1080 -r 180 --hdr-enabled --adaptive-sync %command%
90-130 FPS high settings DLSS Quality, FSR 3.1 Frame Generation.
Dualsense controller works, just disable Steam Input, but the vibrations are weak and you have to plug your headphones in the auxiliary port of the controller instead of your monitor or a DAC. So I'd recommend just sticking to Steam Input and translating your controller to Xinput.
And half of the controller icons are low-resolution, might have something to do with the SteamDeck=1 setting.
Also, if you're using an unlicensed copy like I am, following this will fix the startup crash: https://www.reddit.com/r/LinuxCrackSupport/comments/1fkt1i2/god_of_war_ragnar%C3%B6k_black_screen_and_crash/
SteamDeck=1 %command%
Since this game requires a PSN login, using i3wm will cause a black unresponsive screen. To resolve this, I temporarily installed GNOME and launched the game, allowing it to open a Firefox window where I could log into PSN. After successfully logging in, I removed GNOME, and now the game runs perfectly on i3wm.
I also noticed a large number of kernel_split_lock messages in dmesg. To address this, I experimented with disabling split lock detection via kernel options. After doing so, I observed a significant improvement in the game's performance—it now runs incredibly smooth.
Game does not start on Intel Arc card
SteamDeck=1 %command%
vcrun2019
2663.262:0150:026c:fixme:vkd3d-proton:d3d12_device_GetCustomHeapProperties: Unhandled "heap type 0x5." Gets spammed and the the application crashes.
